top of page
Screenshot 2024-10-28 at 2.56.55 PM.png

Who’s Stealing Your Yield?The Boogeymen in Your Field

Red Barn Enterprises
5 days ago
8 min read


Did the boogeyman steal your yield?

Welcome back to the EZ Ag Podcast, where innovative farming meets practical solutions. I'm your host, Matt Long.

Today, we're going to dig into where the boogeyman is stealing yield on your farm and talk about what you can do about it next year.

As we begin, I think it's important to understand that there are really two boogeymen on the farm. The first is the uncontrollable one. The second is the one we have control over, and that's the one we're going to focus on today.

Let's start by listing a few things the uncontrollable boogeyman seems to use to steal yield from us every year.


Some of those include:

  • Rainfall amount and timing

  • Extended drought periods

  • Extreme heat during pollination

  • Hot, dry winds in late spring or early fall

  • Frost, hail and other severe storms

  • High winds that cause green snap

  • Unexpected insect pressure

  • Disease-favorable weather conditions

  • Unusually high evaporative demand

  • Soil variability and differences in water-holding capacity


Disease-favorable weather is a perfect example. This boogeyman was out in full force this year when it came to conditions during pollination in irrigated corn.


Another example is unusually high evaporative demand. This happens when it's extremely hot and we have a big windstorm on the same day. When you're dealing with 30- to 40-mile-per-hour winds and temperatures of 100 to 105 degrees, that's unusually high evaporative demand. That boogeyman will get you every once in a while.


Soil variability and water-holding capacity are also factors out in the field. We might be able to manage around them a little bit, but they're not always something we have control over.


Now, let's talk about the controllable boogeyman.

This one comes down to our management plan and the way we perform field operations. These are things we can control, and we can do a better job of managing them next year.


Hybrid selection and seed placement are two factors that can steal yield. Others include:

  • Planting population and spacing

  • Planting date and seedbed conditions

  • Soil fertility and nutrient balance

  • Nitrogen rate and application timing

  • Irrigation amounts, scheduling and timing

  • Weed, insect and disease management

  • Timeliness of field operations

  • Soil moisture conservation

  • Crop planning and execution


Weeds, insects and disease are three of the biggest boogeymen on the farm that we do have some control over. Timeliness of field operations plays a major role in managing those factors.


Soil moisture conservation is another important consideration. Are we doing our job from a no-till perspective? Are we conserving residue on top of the ground to help increase soil moisture conservation?


Finally, crop planning and execution are probably two of the biggest factors when it comes to the boogeyman stealing yield from your farm.


We're going to talk about these factors in more depth and discuss what we can do to control the boogeyman that's inside our own management decisions and field operations.


We'll cover these topics through the five principles of the Max Yield System. Following these five principles can help us overcome that boogeyman and increase yield over time.


Principle 1: Early Planning, Not Planting

The number one factor in the Max Yield System is early planning, not planting.


We're going to make a plan well in advance of planting. We'll evaluate factors that can limit success and develop a cropping plan designed to increase both bushels and profitability.


I think it's very important to understand that when we're developing a plan for success, we want to increase both bushels and profitability.


It's not always profitable to continue increasing the number of bushels we grow on our farm.


When we focus on both factors, we can identify opportunities to save money in years when conditions don't exist for maximum yield. Then, in years when conditions give us the opportunity to grow more bushels at a profitable level, we can continue investing in that crop.


Principle 2: Hybrid Portfolios

The second thing we're going to visit about is hybrid portfolios.


Different growers have different perspectives on how they develop their hybrid portfolios.


Some think buying the top one or two hybrids from each seed company creates a more diverse portfolio. While that may provide diversity from a genetic background perspective, it doesn't always create the best hybrid portfolio from a risk mitigation standpoint.


When we talk about hybrid portfolios, we want to focus on mitigating risk by selecting hybrids with diversity in maturity and stress tolerances. This helps increase yield and reduce losses due to uncontrollable variables.


When we look at the stress tolerances and productivity of a hybrid, we need to consider the overall portfolio.


We don't want all racehorse hybrids in that portfolio. If you're buying just the top one or two hybrids from every company, you might end up buying all racehorses.


On the other hand, if you're basing your decisions on hybrid performance in a really tough year, the test block data from a company might lead you to plant only the toughest hybrids with the highest stress tolerances.


But what we know about next year's conditions is that they're going to be different from this year. They might be better, or they might be worse.


We don't want all racehorse hybrids out in the field, and we don't want all the highest stress-tolerance hybrids either.


We want a combination, or a portfolio, that has diversity in maturity and stress tolerance. That helps create the highest yield over time and across every acre on your farm.


Principle 3: High-Yield Planting

The third principle is high-yield planting.


This is a big one. Planting is the number one place where we have control over what's happening in our field.


The highest yield you're ever going to grow on your farm is determined the day you plant.


You cannot redo planting. Very rarely do we get a chance to go back and replant and establish the maximum yield potential that we could have achieved if we had done it right the first time.


That's why we're going to focus on the controllable variables of the planter.


Soil Conditions at Planting Time

The number one variable is soil conditions at planting time.


If you don't have the right soil moisture and soil temperature, and you're not getting that seed slot closed properly, you're not setting yourself up for success.


You need to pay attention to soil conditions at planting time. It's one of the most important factors.


Seed Placement

The second piece is seed placement.

For corn, for instance, we want to place that seed at least two inches deep. It could be anywhere from two to two and three-quarter inches deep, as long as we're getting that seed placed properly in the ground.


We want to make sure we're getting the seed slot closed cleanly and placing the seed into even moisture and temperature conditions in the soil.


That's what we want to see when we have good seed placement.


Seed Quality

The third factor is seed quality.

This is something we take a lot of pride in here at Axis Seed. We have very high seed quality from both a warm and cold germination standpoint, especially compared to many of the other dealers in our area.


As an independent regional company, we have data on the quality of every lot of every hybrid we sell.


We also try to select which grower gets which seed quality based on when that grower typically plants.


For example, if we have a grower who we know plants early in cold, variable soil conditions, we're going to give him the highest-quality cold germ seed we can.


All of our cold germ seed is high quality, but we know the exact numbers for every lot. We know whether one lot is 91%, another is 90%, another is 88%, or another is 94%.


That allows us to select the highest-quality cold germ seed for growers who are going to be planting early in those cold, variable conditions.


The Right Hybrid in the Right Field

The next factor is placing the right hybrid in the right field.

We spend a lot of time determining which hybrid is right for each field. We create our planting plan based on those recommendations.


We always have a couple of backup options, too. If things aren't going quite the direction we want them to in the spring, we don't always have to dump the planter out and switch to another hybrid.


Instead, we plan ahead for the right hybrid in the right field. That helps take the human variable out of creating maximum yield.


Principle 4: Post-Planting Management

The fourth principle in the Max Yield System is post-planting management.

We're going to assess crop conditions, evaluate yield-limiting factors and make timely management decisions throughout the season. Those decisions help us maintain the yield potential we established at the planter.


When we talk about post-planting management, it's important to go back to one of our earlier conversations and discuss the concepts of Push, Protect or Pull Back.


This is really the decision tree we use when making post-planting management decisions.


We can either push a crop, protect it or pull back.


Push

When a crop is looking really good and conditions are favorable, we're going to continue investing in that crop and push it to increase bushels and profitability.


Protect

We can also protect a crop.

This is when we have a decent-looking crop or a pretty good-looking crop out there, but conditions just aren't in our favor.


Think about this year. If you had a really nice stand of irrigated corn, but things were getting pretty tough from a heat and drought perspective, you might not have been sure you could keep up.


That's when we're going to protect that crop.

We might use a fungicide to protect it. Depending on the issues we're facing, we might use an insecticide or miticide.


The goal is to protect the maximum yield potential we created at the planter.


Pull Back

The third option is to pull back.

When things just aren't looking good and there's almost no hope left, we're going to pull back on that crop.


That means we're going to stop investing in a crop that we don't believe is going to provide a return on the investment we're making.


Push, Protect or Pull Back. Those are the three decision points we use in post-planting management.


Principle 5: Harvest Evaluation

The fifth and final principle in the Max Yield System is using harvest evaluation to improve our success in next year's plan.


We typically start planning with our growers before harvest.


This is a field-by-field plan. We start placing hybrids on those plans, looking at soil fertility, sampling fields and developing nutrient recommendations.


Then we take that harvest evaluation process out to the field. We ride along with the grower in the combine and get a better understanding of what the crop looks like in each field.


We use those observations to inform and update our plan before we get to planting next year.


When we use harvest evaluation correctly, we're taking real-time observations of harvest results in partnership with the growers we're working with.


That enhances our knowledge and improves product placement and planning for the next season.


Keeping the Boogeyman at Bay

When we put all of these principles together, we're keeping the boogeyman at bay.

The boogeyman is trying to keep us from improving yield, increasing bushels and improving profitability over time. It does that by stealing yield from our fields through simple things that we sometimes overlook each year.


But those controllable variables are things we can overcome.


The Max Yield System helps us dial in those decisions over time, increase yield and improve profitability on your farm.


Thanks for joining us today as we talked about the boogeyman and the Max Yield System.


And remember, ag is easy when you tune in to the EZ Ag Podcast.

Grow your yield. Grow your legacy. Grow strong with Axis Seed.

Comments


bottom of page